首頁                 公司簡介         新聞中心         產品信息     技術應用             聯系我們         English     
        HOME                             PROFILE                           NEWS                             PRODUCT                  APPLICATION                     CONTACT                 Germany
瑞士LECOM 儀器 儀表 總攬
電能質量分析/監測
功率分析儀
高精度 單相/三相 交流仿真基波源
超聲波測高/測距
機械電氣設備安全特性綜合測試儀表
耐壓測量儀表
絕緣電阻測量儀表
Hipot 試驗儀表
接地電阻測量儀表
紅外線測溫儀表
鉗表 萬用表
蓄電池維護測量
過電流保護校驗
LECOM 特價儀器儀表
LECOM 電纜故障測試
LECOM 多功能電量表
LECOM 大電流微歐計
MEGGER AVO產品
Megger 保珈瑪產品
美國HV交流直流耐壓
  LECOM公司對產品提供質保,技術支持,維修服務。
* DCM310 DCM320產品簡介
* DCM330產品簡介
* DCM340產品簡介
您現在的位置: 首頁 > 產品信息 > MEGGER AVO產品 > DCM310 DCM320 DCM330 DCM340數字鉗型表
在線客服 skype Me™! 點擊交談 點擊交談 點擊交談 點擊交談 點擊交談
DCM310 DCM320 DCM330 DCM340數字鉗型表

更多信息,請點擊查看:
MEGGER AVO鉗型萬用表總攬
LECOM真有效值鉗表 功率鉗表 真有效值工業萬用表
LECOM特價儀器儀表

DCM340 Clampmeter

  • DC and AC current and voltage
  • 600 A and 600 V
  • Resistance and continuity
  • 31/2 digit, 4000 count display with backlight
  • High resolution digital bar graph
  • Peak, min/max and data-hold functions
  • Zero-offset REL mode for comparative measurements
  • Supplied complete with test leads and carry case
  • IEC61010 CAT III 600 V

The DCM340 is a highly versatile instrument and ideal for use in the installation, maintenance, monitoring or checking of a.c. or d.c. electrical systems and equipment.
The DCM340 is safety rated to IEC 61010-1 Cat III 600 V, and is drop-tested to 1.2 m onto a hard floor. It is supplied with test leads and a carry case, and a full 1-year manufacturers warranty.


DCM330 Fork Multi meter

  • 200.0 A a.c. open-jaw current measurement
  • 0.1 V to 1000 V auto-ranging a.c. and d.c. voltage measurement
  • 0.1 Ω to 20.00 MΩ resistance range
  • Continuity buzzer
  • Diode check
  • Non-contact detection of a.c. voltage
  • CAT III 1000V

The Megger DCM330 Fork Multimeter is a convenient, compact instrument designed to measure ac current up to 200 A, and additionally perform all the functions of a basic
multimeter.
 

DCM310 and DCM320 Clampmeter

• Option of current only , DCM310 or multimeter, DCM320 models
• Measures up to 400 A a.c. with low current ranges for improved resolution
• 600 V a.c./d.c. DCM320
• 20 MΩ Resistance DCM320
• Data Hold
• Max Hold DCM310
• Small pocket-size design
• Exceptional battery lifetime
• Supplied with carry case
• IEC61010 CAT III 600 V
The DCM310 and DCM320 are ideal clamp meters for use during the installation, maintenance and checking of electrical systems and equipment.
The large clamp jaw enables cables to be measured up to 27 mm diameter, so covering the majority of applications within the electrical system installation industry.



            
點擊下載PDF閱讀器 返 回
 
友情推薦網站:中國儀器儀表網 | 中國電能質量網 | 瞬態與故障錄波器網 | 中國安規檢測網 | 西金儀器儀表網 |
       美國Megger AVO | 愛爾蘭Suparule測高儀 | 德國Zimmer功率分析儀 | 德國GMC Gossenmetrawatt | 美國高電壓 High Voltage |
       尼泊爾頂級唐卡網 | 匯瑞獵頭 | 楊式太極拳網 | 中國現代化網 |
首頁 設為首頁聯系我們  |  網站地圖  |  人才招聘
Copyright © 2006,北京西金儀器儀表有限公司,保留所有權利 京ICP備08002352號
www.dldyje.live  [email protected]  [email protected]  [email protected]
  在線客服 skype Me™! 點擊交談 點擊交談 點擊交談 點擊交談 點擊交談
企鹅假期试玩